"We've had Cody as our cooling and AC tech for three years and he has helped us keep an aging system going and working well. We like the fact that GV Cooling & Heating has assigned us an excellent tech who knows us and our system. Cody shows up on time, explains what he's doing or has done and is thorough in his maintenance procedures even in a hot Arizona attic. He and his company really deserve our five-star rating."
At Paso Robles Heating and Air, heating and cooling isn’t solely our job, it’s our passion. We strive to provide you with the top HVAC service in Paso Robles. No matter the size of the problem or time of day, you can trust us to get the job done right. After all, Paso Robles Heating and Air has been servicing the community since 1983, bringing comfort to our customers right when they need it.
If you believe that the ac not working or you’re getting little or no cold air, check these three things first. Make sure all the registers in the house are wide open. Then be sure the furnace filter is clean. Then go outside and clean off the condenser coils (Photo 2). If several registers were closed or the filter was clogged, the reduced airflow could have caused the evaporator coil to ice up and stop cooling your home. If you’ve changed the filter and opened all the registers and you’re still not getting airflow at the registers, deice the A-coil. Move the thermostat mode switch from “Cooling” to “Off” and move the fan switch from “Auto” to “On.” Let the blower run for at least 30 minutes or until there’s good airflow at the registers. Then turn the AC back on to test it. If it works for the next 12 hours, you’ve solved the problem.
Central home air conditioner service systems consist of two major components: a condensing unit that sits outside your house, and the evaporator coil (often referred to as an A-coil) that sits in the plenum of your furnace or air handler. The refrigerant in the A-coil picks up the heat from your home and moves it to the outdoor condensing unit. The condensing unit fan blows outside air through the condensing coil to remove the heat. The condensing unit houses the three parts replaceable by a DIYer: the contactor, the start/run capacitor(s) and the condenser fan motor. The condensing unit also houses the compressor, but only a pro can replace that. The A-coil has no parts that can be serviced by a DIYer.