The cost to replace your gas furnace will vary based on the type and size of furnace you select, labor and installation costs, and any repairs your HVAC system may need. Nationally, average HVAC prices for a heating specialist range between $1,800 and $2,500. It’s important to select the right size gas furnace for your heating needs. A furnace that’s too small won’t heat your house properly, while a furnace that’s too large will run inefficiently, cycling on and off and likely breaking down sooner. HVAC specialists calculate your exact heat needs by measuring your home and incorporating variables such as the regional climate and your home’s level of insulation. Retail pricing for gas furnaces can range from $650 up to $3,000 and more. The higher the AFUE (annual fuel utilization efficiency) rating of the furnace, the more efficient it is at turning fuel into heat and the lower your carbon footprint and utility bill will be. HVAC installation costs are often based on an hourly rate and can range from under $50 to over $100 per hour, depending on the company and the furnace being installed. Higher-end furnaces cost more to install because they require added labor and expertise. For a typical installation, it might take two HVAC installation pros one day or less to remove your old furnace and replace it with a new one.
Many disconnect blocks contain two cartridge fuses. Check them before you proceed with repairs (Photo 3). A blown fuse is a sign of a failing part inside the condensing unit. So don’t just replace it and think you’ve solved the problem. Instead, replace the parts we show here. Then install new fuses and fire up the unit. If it blows again, call a pro—you’ve got more serious issues.

An improperly maintained heating and air conditioning is an inefficient heating and air conditioning system. That’s why we provide appointments for annual inspections with our licensed technicians. It’s our goal to make sure that your home is as comfortable and energy-efficient as possible. For inspections, repairs, and service, contact BGE HOME for quality service.
The thermocouple is a copper rod that the pilot flame heats-up. When it gets hot enough, the thermocouple signals that there is enough heat to burn the gas fuel being released into the appliance—and so it allows the gas to be released to the burners. In some cases where the pilot light won’t stay lit, the thermocouple needs to be adjusted or replaced. This is generally a job for a professional.
If your furnace’s motor runs but the blower doesn’t move air, the belt that connects the two probably has broken. Replacing it is an easy fix. First, turn off all power to the unit and turn off the gas at the gas valve that serves the furnace. Remove the door on the front of the furnace cabinet to give you access to the blower (it might be on a slide-out drawer.) Check the number stamped on the belt and get an exact replacement from a home center or heating supply outlet.
When your heating system can no longer provide the heating efficiency you need we will recommend options for a replacement. We can supply and install your new furnace, ductless heating system, heat pump or other heating system and quality-check the installation to ensure it is working to manufacturer’s specifications. You’ll also have our Trane Performance Guarantee of 100% satisfaction with your new system, and a lifetime warranty on all workmanship.
Next check and clean the furnace’s flame sensor. The video below shows you how—note that this guy fixes it in about 5 minutes. We would probably use a little bit of emory paper, but he cleans the sensor with a 5-dollar bill. Another video further down the page under the discussion of “If your furnace keeps shutting off after about 5 minutes” shows the same project with a different brand of furnace.
Our NATE-certified technicians are always available, 24 hours a day and 365 days a year, to resolve emergency situations quickly and accurately.  Our team participates in factory-sponsored training updates, utilizes leading-edge diagnostic equipment, and follows strict installation and service procedures.  Every single Green Valley Cooling & Heating technician is clean air certified.  Rest assured, when you contact Green Valley Cooling & Heating, your call is answered by a skilled and experienced professional, who puts your best interests first.
At Paso Robles Heating and Air, heating and cooling isn’t solely our job, it’s our passion. We strive to provide you with the top HVAC service in Paso Robles. No matter the size of the problem or time of day, you can trust us to get the job done right. After all, Paso Robles Heating and Air has been servicing the community since 1983, bringing comfort to our customers right when they need it.

When your heating and cooling system stops working, you need the help of a reliable, experienced, local service professional that can diagnose the problem and repair your air conditioner or furnace at a fair price. You can count on The Home Depot's licensed and insured heating and cooling professionals for all your heaters, air conditioning units, and any ventilation needs.
Consequently, this water must exit the air handler—typically through plastic pipe or a drain tube. That drain tube goes directly outside, often terminating near the compressor, or to a floor drain or to a small electric “condensate pump” located by the air handler. Where a condensate pump is used, it connects to a 1/2-inch vinyl or rubber tube that exits outdoors or to a drain.
Whether you need to schedule an AC repair, your yearly air conditioner service or are interested in finding a new AC or other services, give Paso Robles Heating and Air a call at 805-203-8667. Phones not really your thing? You can also set up an appointment using our online scheduler. We always look forward to serving the Paso Robles community and surrounding area, and will help make your home more comfortable in no time.
If you find yourself having a more traditional concern, we can help with that as well. Whether you’re looking to upgrade to a more energy efficient system, require an emergency furnace repair, or need to schedule an annual appointment, we’re here to help. We can tackle any issue or concern that you may have with your HVAC system. Our team will give you confidence and peace of mind when it comes to your HVAC system.

As the first Carrier Factory Authorized Dealer in the area, Nerthling's Heating and Air Conditioning is recognized for exemplary business practices, customer loyalty, and industry knowledge.  Our service team continues factory training, staying updated with ever-evolving techniques and technology.  We remain current with product development, qualifying us to identify equipment that accurately suits your needs and allows for maximum efficiency.  We install proven reliable systems with a track record of durability, in a variety of configurations, guaranteeing an ideal match to your expectations.  We specialize in the installation, service, and repair of air conditioning, heat pumps, furnaces, boilers, geothermal options, generators, air quality solutions, and ductless HVAC.
In the cold winter weather in Grass Valley & surrounding areas, you need a reliable heating system. With options such as heat pumps, ductless HVAC, or standard furnaces, there’s something for everyone. A & A Air Conditioning Heating & Sheet Metal is qualified to install, repair, and maintain your heating system so you can sit back and enjoy consistent warmth all winter long. When you call A & A Air Conditioning Heating & Sheet Metal, know that you will have a knowledgeable, dedicated technician at your door to help solve any issues you may have. Trust our team for all your heating needs!
When central air conditioning service fails during a heat spell, you may have to wait days for an HVAC repair technician or a ac contractor to show up, and you’ll probably pay at least several hundred for the repair. But if you’re comfortable working around electricity and are willing to spend about $50 on parts, you can probably repair your air conditioning service yourself in about two hours and save about $225 on parts markup and labor.

Arundel Cooling has been proudly providing HVAC services in Columbia, Maryland for more than 40 years now. With this much experience, we bring our extensive knowledge and expertise to every HVAC repair or installation job we complete. No matter what time of day, Arundel Cooling and Heating will be there for you. We make ourselves available 24 hours a day, 7 days a week, so whether you need to schedule an appointment or you’re having a heating and cooling emergency, you can count on Arundel Cooling and Heating.
Coomes Air Conditioning & Heating, is a Texas (TX) Heating, Cooling, Air Conditioning, Heat Pump, Ductless Mini-Split, Fireplace, and Furnace repair, service, replacement, and maintenance Company located in South Dallas area. Coomes Air Conditioning & Heating employs only the best technician for air conditioner repair, gas or propane (LP) furnace repair, and heat pump repair as well as all air conditioner replacement, furnace replacement and ductless ac replacement. Coomes Air Conditioning & Heating provides emergency service to Arlington TX, Cedar Hill TX, Combine TX, Dallas TX, Desoto TX, Duncanville TX, Euless TX, Forney TX, Fort Worth TX, Garland TX, Glenn Heights TX, Grand Prairie TX, Hurst TX, Irving TX, Kaufman TX, Lancaster TX, Mansfield TX, Mesquite TX, Midlothian TX, Ovilla TX, Plano TX, Red Oak TX, Richardson TX, Rowlett TX, Seagoville TX, Waxahachie TX, and Wilmer TX. So when you ask to find "A good heating and air conditioning repair or service company near me," you've come to the right place. To set-up a repair service estimate or replacement estimate, call (972) 296-2604. Coomes Air Conditioning & Heating services all furnace, AC, humidifier, filter, and thermostat brands including Arcoaire, Carrier, Bryant, Payne, Trane, Lennox, Rheem, Ruud, Amana, Frigidaire, Gibson, Goodman, Maytag, American Standard, General, Aprilaire, Honeywell, White Rodgers, Dynamic, Daikin, Mitsubishi, Fujitsu, and Skuttle.

Need your air conditioning repaired today? Let Dunes Heating and Air Conditioning LLC.  same-day air conditioning repair service come to the rescue. Our air conditioning repair, maintenance and installation technicians and contractors are some of the most highly skilled AC repair technicians in the area. So whether you need your commercial air conditioner repaired or your home air conditioning system replaced, let our team of factory trained and certified home central air conditioning repair technicians be there for you and your family!
A & A Air Conditioning Heating & Sheet Metal partners with Bryant brand HVAC products, ensuring the right answer to any challenge.  These industry-leading heating and cooling options, including furnaces, air conditioners, heat pumps, boilers, and ductless models, protect your long-term satisfaction with superior energy efficiency, reliability, and ease of management.  Whether you’re installing new, or updating old, let the team from A & A Air Conditioning Heating & Sheet Metal custom design the perfect system.  Since first opening our doors, we’ve installed over 15,000 systems in a wide range of applications.  Our fully licensed, insured, and trained professionals are further qualified in solar energy solutions and water heating.
New heating and cooling equipment installations present a wide variety of options that can save you money on your power bills and reduce the amount of HVAC maintenance and service that will ultimately be required over the life of your new unit. Energy-efficient options like heat pumps, two-stage furnaces, air-to-heat exchangers (HRVs), and programmable thermostats can all go a long way toward increasing efficiency and extending the life expectancy of your system.
If your furnace needs to be repaired, you’ll want to find a qualified heating, ventilating and air conditioning (HVAC) repair technician. Each state has its own licensing requirements; some require all HVAC technicians to have an HVAC license, while others only require someone operating an HVAC service and installation company with employees to hold a contractor’s license. For example, in Alabama, the Alabama Board of Heating Air Conditioning, and Refrigeration Contractors regulates licensing, while in Kansas there is no state regulatory body and HVAC licensing can vary by region. For simple furnace repairs like changing out a filter, a trusted handyman can probably handle the job, but a trained professional should be hired for tasks like replacing a gas valve, installing a new inducer fan motor or other critical furnace repair jobs that involve dealing with gas leaks or other dangerous conditions. For more, check out our tips for smart hiring on Thumbtack.
×